If the parking brake works, release it and test the service-brake stopping action. Look at the gauges and ensure each is operating within a normal range. Ensure that cargos are properly secured and required signs are hung.
Check to see if any of the controls seem loose or sticky. Find out how to prepare by using this study guide!
Passenger Transport Test Passing the Passenger Transport test will entitle you to transport eight or more people in a for-hire vehicle. After your trip, fill out a Vehicle Inspection Report noting anything that may need to be addressed for maintenance or safety. Be sure to check specific regulations in your state regarding these guidelines.
Turn off lights unnecessary when driving, have all your needed paperwork with you, secure any loose items in the cab, buckle up, and start the engine. There is also a road test component. We frequently share trucking related news, stories, and memes, so check in often!
Check if all engine fluids are at optimal levels. The brakes and suspension should be working; the fuel tank, exhaust system, and transmission should not be leaking. Signals facing the front of the vehicle should be amber or white, while your rear-turn signals and stop lights should be amber, red, or yellow.
Check the last written Vehicle Inspection Report to see if there were any problems and if they have been fixed. Hazardous Materials Test Driving a truck that carries hazardous materials requires an additional set of safety precautions.
Our study guide will outline it all for you and you can get your preparation started! Go outside the vehicle, if needed, to ensure that the lights flash the correct color. Many of these are covered in the General Knowledge section of the CDL test and this study guide will help you know what to study.
Go about 5 miles per hour and firmly push the brake pedal down. Note the general condition of the vehicle and look for leaks. Ensure the wheels are chocked or the parking brakes are on.Figure details which sections of this manual you should study for each particular class of license and for each endorsement.
*Study section 5 if you plan to operate vehicles equipped with air brakes. CDL in the driver’s possession, and driving a CMV. i This Commercial Driver License (CDL) Guide is a summary of the laws and rules that apply to all drivers of commercial motor vehicles in Washington State.
It is not a book of laws, and should not be used. business or commercial enterprise. Introduction Commercial Driver’s License Manual CDL Testing System Section 1 – Introduction | Page 7.
CDL Overview CDL Vehicle Classes Class A — Combination Vehicles.
Any combination of vehicles with a gross combination weight rating (GCWR) of. drivers to get a Commercial Driver’s License (CDL). You must have a CDL to operate any of the following Commercial Mo-tor Vehicles (CMVs): a. Anyone required to have a CDL to drive a commercial motor vehicle is subject to alcohol/controlled substance testing.
of the handbook to study. CLASS A: Any combination of vehicles with a gross combination weight place of business or the farm currently being served. 3. 1 proof of residency, such as a payroll check or check stub, voter registration card, IRS W-2 form, U.S.
or state income tax return. Residency documents must show your name and the address of.Download